Awning Windows

Awning Windows in Deerfield Beach, FL | TruePane Windows & Doors

Awning windows are top-hinged, crank-out impact windows built for Florida weather. They open outward from the bottom, which means you can leave them cracked for airflow during a summer rain and the glass actually sheds water away from the opening. For Deerfield Beach homeowners, that’s a real advantage, especially in bathrooms, kitchens, and any room facing the Intracoastal. TruePane Windows & Doors sells and installs impact-rated awning windows across our PGT, CGI, CWS, ES Windows, ECO, and Mr-Glass lines. If you’re replacing windows in Deerfield Beach or planning new construction, call (786) 743-5882 and we’ll walk you through your options, measure your openings, and give you a written line-item quote.

Call (786) 743-5882

Product Overview - Awning Windows

An awning window hinges at the top and cranks outward, creating a sloped glass surface that blocks rain while still letting air move through the room. In South Florida, that geometry matters. Deerfield Beach gets afternoon downpours all summer, and a standard window left open during a storm soaks the sill and the wall below. An awning window doesn’t have that problem. You get ventilation without the water damage.

Architecturally, awning windows work well stacked above fixed windows or doors for light and airflow without a large operable footprint. We see them often in Deerfield Beach mid-century homes along Hillsboro Boulevard, in coastal condos near the beach, and in newer builds in The Cove and Crystal Lake neighborhoods. They read clean and modern, and because the crank mechanism pulls the sash tight against the frame, they seal better than many sliding profiles once closed.

What sets this product apart for hurricane-prone construction is the glazing and the frame engineering. These are not decorative windows with impact glass added as an afterthought. The impact-rated awning uses laminated glass with a PVB interlayer set into a weathertight frame. When the sash closes, compression seals around the full perimeter keep wind-driven rain where it belongs: outside. TruePane Windows & Doors installs this product throughout Broward County, and we’ve placed awning windows in Deerfield Beach homes from single-family ranches to oceanfront builds that carry full HVHZ permitting requirements.

We’d rather show you the product than describe it. Call (786) 743-5882 and we can bring samples to your Deerfield Beach home.

Technical Specifications

Every awning window we order is configured to the opening, the wind zone, and the finish you choose. Here’s what’s available across the lines we carry:

• Frame materials: Aluminum or vinyl. Aluminum gives you a slimmer sightline and holds finish color well in salt air. Vinyl offers excellent thermal performance and a lower profile price point for inland Deerfield Beach homes.
• Glass options: Laminated impact glass with PVB interlayer, Low-E insulated glass, tinted glass, and clear glass. Impact glazing is standard on hurricane-rated configurations.
• Color and finish options: White, almond, bronze, black, and tan. All five finishes are available on most product lines, with custom color matching available on select aluminum series.
• Screen options: Fixed screen or retractable screen. Retractable screens cost more but disappear when not in use, which preserves the clean sightline from inside.
• Operation: Crank-out hardware with multi-point locking. The crank closes the sash evenly against the frame, which is part of why awning windows seal so well in wind-driven rain.
• Design pressure: Matched to your wind zone, up to +/-100, never higher. We don’t oversell a rating you don’t need, and we don’t under-spec an opening that sits on a corner or high on an oceanfront wall.

Sizing is per-opening. We measure every rough opening in Deerfield Beach before ordering, so you get a window built for the actual hole in your wall, not a stock size forced into place.

Hurricane & Compliance Performance

Laminated Impact Glass: The glass is built with a PVB interlayer that holds the pane in the frame under impact. If something hits the window, the glass may crack, but it stays in place, keeping wind, rain, and debris outside your Deerfield Beach home.

Miami-Dade NOA / Florida Product Approval: The awning window carries Miami-Dade NOA and Florida Product Approval numbers issued per configuration. We list the exact numbers on your quote so your permit application is straightforward. Verify the specific number for your chosen size and glass package before submittal.

FBC / HVHZ Compliance: Engineered to Florida Building Code High-Velocity Hurricane Zone requirements. Deerfield Beach is an HVHZ jurisdiction, so this matters for permitting, insurance documentation, and long-term performance.

TAS 201 / 202 / 203 Testing Context: These products are tested under the protocol family HVHZ-rated windows must pass: TAS 201 for large-missile impact, TAS 202 for cyclic wind-pressure loading, and TAS 203 for forced-entry resistance. That’s the standard we reference when we talk about impact-rated performance.

Design Pressure for Your Wind Zone: We match design pressure to where the window lives: a first-floor inland wall needs less capacity than a third-floor corner unit facing the ocean in Deerfield Beach. Ratings go up to +/-100, never higher. We don’t pad numbers because we don’t need to when the spec is matched correctly.

Energy Performance: Low-E and insulated glass options are available for homeowners who want more than impact protection. A Low-E insulated package reduces heat gain through the glass, which is noticeable in Deerfield Beach rooms that take afternoon sun.

Color & Glass Options

Deerfield Beach architecture runs from 1960s ranches to new coastal contemporary builds, and the finish you choose changes the look of the whole elevation. White is the default for a reason: it’s clean, it works with nearly every stucco or siding color, and it doesn’t fight with other trim. Almond and tan suit older Florida homes with warmer exterior palettes, while bronze and black read more dramatic and pair well with modern builds and dark roof lines. On aluminum frames, black holds up well in coastal exposure because the finish is baked on, not painted after the fact.

Clear impact glass is the most affordable hurricane-rated option and the right call if you don’t have a specific sun or heat problem. Tinted glass cuts glare and solar heat, useful in west-facing rooms along Deerfield Beach canals where afternoon sun hits hard. Low-E insulated glass gives the best year-round temperature performance, and it’s worth considering if you run AC much of the year and want the glass to do more than protect the opening.

If you’re unsure, we’ll narrow it for you. Call (786) 743-5882 and describe the room and the wall. We’ll recommend a glass package and finish that fits your Deerfield Beach home and your budget.

Installation by TruePane Windows & Doors in Deerfield Beach

An impact window is only as good as its installation. You can buy a fully NOA-rated awning window and still get water intrusion, air leaks, or a failed inspection if the opening isn’t prepped and sealed correctly. We’ve pulled failed windows out of Deerfield Beach homes where the product was fine and the install was the problem. We don’t want to be the next crew fixing that job, so we do it right the first time.

Every install starts with a pre-install inspection. We check the rough opening for rot, out-of-square framing, and water damage before the new window goes in. If the opening needs corrective framing, we handle it. Then we set the window level, plumb, and square, which matters on a crank-operated sash because an out-of-square frame leads to binding hardware and uneven compression seals over time.

We follow AAMA 2400/2410 installation practice, and we use AAMA 812 low-expansion foam around the full perimeter. The foam seals, insulates, and allows for the normal movement of a Deerfield Beach building through heat and humidity cycles. After the window is secured and trimmed, we run a water test on the opening to confirm the seal is doing its job before we clean up and leave the site.

Deerfield Beach is an HVHZ jurisdiction, so we also know what your permit package needs: NOA or Florida Product Approval numbers, wind zone documentation, and the right product configuration for the opening. We’ll provide all of it so your inspection goes through without surprises.

Improper installation compromises the entire NOA-rated system, and in a coastal city like Deerfield Beach where wind-driven rain is a weekly summer event, that’s not a risk worth taking. Call (786) 743-5882 and let’s talk about your openings.

Frequently Asked Questions - Awning Windows

Get a Quote - Awning Windows in Deerfield Beach

Replacing windows in Deerfield Beach is a decision you make once every couple of decades. We’ll help you get the product, the finish, and the glass package right. Call TruePane Windows & Doors at (786) 743-5882 to schedule a free on-site measurement and get a written, line-item quote. No pressure, no vague pricing, just real numbers for your specific openings.

Written by the team at TruePane Windows & Doors, serving Deerfield Beach and surrounding Broward County communities with hurricane-impact windows and doors.