Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Hillsboro Beach
Custom window and door work in Hillsboro Beach is not a standard installation job. Every opening on every elevation of your home has to meet Broward County’s High-Velocity Hurricane Zone code, which requires Miami-Dade/Broward NOA-approved impact-rated glazing on all sides. There is no non-impact option here, unlike inland Broward cities where only certain openings are mandated. TruePane Windows & Doors has been installing custom windows and doors in Hillsboro Beach for years, and we know exactly what the barrier island demands from a product and an install. If you’re planning a replacement, a remodel, or a custom build, call (786) 743-5882 for a free estimate, and we’ll walk you through what the code actually requires before you spend a dime.
Key Takeaways:
- Every replacement window and door in Hillsboro Beach must carry Miami-Dade/Broward NOA approval. No exceptions, no elevations excluded.
- Salt-air exposure on the Intracoastal side is just as aggressive as the ocean side. Marine-grade hardware belongs on all openings.
- Our quotes include permit coordination, NOA documentation, and both manufacturer warranty layers registered in writing before we leave the driveway.
- Call (786) 743-5882 for a line-item quote. Estimates are free, and the price you’re quoted is the price you pay.
Why TruePane Windows & Doors Is Hillsboro Beach’s Preferred Custom Windows & Doors Company
Hillsboro Beach homeowners tend to ask the same question when we walk a job: will you still be here in ten years if something goes wrong. It’s a fair question, and it’s one we answer the same way every time. TruePane has served South Florida communities since 2008 through founder Dale Kessler’s craft tradition, and we’re structured to still be answering the phone decades from now. A live person answers that phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. If a homeowner on Hillsboro Boulevard calls at 6 a.m. after a rough night of wind, a person picks up.
What builds trust on a barrier island is watching a crew measure an opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck pulls away. That’s our standard on every job, and it’s the standard Dale Kessler keeps on the whiteboard: if the pane is not true, the job is not done. The workmanship side of that commitment is our Done Right Promise. If something isn’t right, we make it right. No paperwork fights, no arguing. You will not find a Hillsboro Beach homeowner who tells you we left a fogged seal or a binding slider and then got scarce.
Our Custom Windows & Doors Services in Hillsboro Beach
This page covers the work we do most often in Hillsboro Beach. If you’re shopping for Custom Windows & Doors anywhere in South Florida, start with our main service page for the full scope. For Hillsboro Beach specifically, these are the services homeowners call us about.
Impact-Rated Custom Windows
Custom windows in Hillsboro Beach are not about aesthetics alone. They’re about surviving a windborne-debris impact during a storm and holding the building envelope intact. We install Miami-Dade/Broward NOA-approved impact windows from manufacturers like CGI, WinGuard® by Andersen, and ES Windows, sized to your existing openings or built to new construction tolerances. For homes between the Atlantic and the Intracoastal, custom sizing means we can preserve the original sightlines of a mid-century estate while replacing single-pane aluminum with laminated impact glass that actually meets current HVHZ wind-load requirements.
Oversized Glass Panels
Waterfront estates in Hillsboro Beach lean toward big glass. Floor-to-ceiling fixed panels, transom runs, and wide-span view walls are common. Oversized panels carry a specific concern on this barrier island: the Hillsboro Inlet at the northern boundary creates a wind-acceleration corridor that amplifies uplift on large glass surfaces during tropical storms. A panel sized to code in Coconut Creek may be undersized for the same opening in Hillsboro Beach. We calculate panel thickness, lamination, and frame anchoring per opening, so the glass doesn’t flex or rack under load. That’s the difference between a code-compliant install and a quote that looks cheaper on paper but fails the first real wind event.
Architectural Grilles & SDLs
Many Hillsboro Beach homes built in the 1950s and 1960s carried divided-light patterns that have since been replaced with flat, featureless aluminum. Homeowners who want to restore that character without sacrificing impact performance call us for simulated divided lites, or SDLs, applied to impact-rated insulated glass units. We match the original grille profiles and spacing from photographs or from the few remaining original windows on the property. The result is a window that looks like the house’s original design and performs to current Broward County hurricane standards.
Commercial Storefront Glazing and Curtain Wall Systems
Hillsboro Beach has a small number of luxury condominium buildings along A1A and the Intracoastal, and those buildings carry common-area glazing requirements that differ from single-family work. Storefront glazing and curtain wall systems in this town must meet the same HVHZ impact standard as residential work, with commercial wind-load calculations submitted for permit. We handle both the engineering coordination and the installation for condo associations and property managers who need documented compliance for their insurance files.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hillsboro Beach
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Hillsboro Beach homeowners the relevant names are CGI, ES Windows, and Andersen’s WinGuard® line. These manufacturers carry current Miami-Dade/Broward NOA documentation for their impact-rated products, which is the piece of paper your permit reviewer and your insurance auditor both want to see. We quote these lines side by side on paper so you can see the price difference, the glass package difference, and the warranty terms for each before you commit. If you have an existing brand you prefer and it is not on our list, ask. We’ll tell you plainly whether it meets Broward County HVHZ requirements for your specific elevation.
Common Custom Windows & Doors Problems We See in Hillsboro Beach Homes
- Intracoastal-side seal failure and frame corrosion: Salt mist from boat wakes on the Intracoastal concentrates on the sheltered west elevation of barrier island homes. Rear sliders and doors on that side often corrode faster than the ocean-facing front openings, and homeowners who assume the back of the house is protected discover delaminating frames and failed seals within a few years.
- Original 1950s-1980s aluminum casement or jalousie windows without impact glazing: A large share of the original housing stock in Hillsboro Beach still carries single-pane aluminum jalousie or casement units. They’re structurally sound in their frames but wholly non-compliant with current HVHZ impact requirements. More importantly, they shatter under windborne debris and leave the house open to wind and water.
- Wind-accelerated sash racking on oversized panel systems: The wind acceleration through the Hillsboro Inlet amplifies uplift on large glass panels, which can rack the sash and distort jamb anchors if the frames were not engineered for the local wind zone. We see this on homes where inland contractors installed non-HVHZ-rated frames on big view openings.
- Flashing failures at jambs from salt-air intrusion: Poorly sealed openings let salt-laden air get behind the frame and eat the rough opening. On a barrier island, flashing is not a detail you can skip. We verify flashing tape at every jamb and sill during install, and we document it in photos for your file.
Pricing for Custom Windows & Doors in Hillsboro Beach, FL
Custom window and door pricing in Hillsboro Beach runs higher than inland Broward cities because the product has to be HVHZ-rated in every opening. A single impact-rated custom casement window in Hillsboro Beach typically runs $900 to $1,800 installed, depending on size, glass package, and manufacturer. A custom-sized oversized fixed panel with laminated impact glass runs $1,800 to $4,500. An HVHZ-compliant custom sliding door with marine-grade hardware runs $3,500 to $9,000 installed. Architectural grilles and SDLs add $120 to $300 per window depending on profile and pattern complexity. If you’re pricing a complete multi-opening project, we provide a written line-item quote so you can see exactly where the dollars land. Call (786) 743-5882 to schedule a free estimate, and we’ll measure every opening and price every option in writing.
We Also Serve Cities Near Hillsboro Beach
If you own property outside Hillsboro Beach proper, we maintain crews across the broader area. We regularly work in Deerfield Beach, Lighthouse Point, Coconut Creek, and Margate, and we’re familiar with the code differences between barrier island and mainland jurisdictions. See our full Hillsboro Beach coverage for details on how we schedule across the county.
Serving Hillsboro Beach, FL - Our Local Coverage Area
We’re based in the Hillsboro Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Hillsboro Beach
All windows and doors in Hillsboro Beach must carry Miami-Dade or Broward County NOA approval for High-Velocity Hurricane Zone wind loads, which generally means design pressures of at least 60 to 80 pounds per square foot depending on the opening’s location and elevation. Your permit reviewer will require the NOA documentation for each product installed. We include that documentation with every quote and with every permit submission. Call (786) 743-5882 if you want us to verify your existing window models against current requirements.
Yes. Broward County’s HVHZ code applies to all elevations in Hillsboro Beach, including the Intracoastal side. There is no partial-impact allowance on the barrier island. The Intracoastal west elevation is also the side where we see the most salt-driven frame corrosion and seal failure, so impact-rated, marine-grade hardware is not just a code requirement but a longevity decision. Call (786) 743-5882 for a free estimate and we’ll walk you through your elevation-specific product options.
Your insurer wants three things: the product’s Miami-Dade/Broward NOA number, proof that both the product and the installation meet the current HVHZ code, and a copy of the passed final inspection. We provide all three in a packet after every Hillsboro Beach install. We register both manufacturer warranty layers in writing before the truck leaves the driveway, and we hold a copy of the inspection record for your file. If your carrier questions a credit later, you’ll have the documentation in hand.
Hillsboro Beach enforces Broward County’s permitting path for window and door replacement. That means a permit application with product NOA documentation, a wind-load calculation if the opening is oversized or non-standard, a rough-opening inspection after the old units are removed, and a final inspection after installation. We pull the permits, coordinate both inspections, and do not call a job done until the final passes. A cheap quote that skips the permit or leaves you to pull it is not a deal; it’s a liability.
Yes, you can, but the shape and the size drive the engineering. Arched, radius, trapezoid, and oversized custom windows all require wind-load calculations specific to the opening, and in Hillsboro Beach’s wind-acceleration corridor near the Inlet, the required lamination and frame anchoring may step up beyond what a standard rectangular opening would need. We work with the manufacturer’s engineering department on the calculations and include them in the permit package. If you’re considering a large custom window, call (786) 743-5882 and we’ll give you a written assessment of what it takes to do it to code on this island.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Hillsboro Beach and South Florida since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.