Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Coral Springs
Door installation in Coral Springs runs $850 to $3,800 for most entry and storm door replacements, with custom arched or pivot doors landing higher depending on glazing and hardware. That range covers the door itself, tear-out of the old unit, new framing where needed, anchoring, flashing, and finish trim. If you’re figuring out what a new door for your Coral Springs house actually costs and how it gets done without surprises, you’re in the right place. Call (786) 743-5882 and you’ll reach a live person who can talk through your project and schedule a free estimate.
Coral Springs is our home turf. Our crews work in every neighborhood from Cypress Run to The Hills to Westchester, and we know what comes out of these 1970s-to-1990s concrete-block walls when a door comes off. We also know the permit desk and the HOA review boards. That knowledge shows up in the quote you get, not in change orders a week later.
Why TruePane Windows & Doors Is Coral Springs’s Preferred Door Installation Company
Dale Kessler founded TruePane in 2008 because he kept walking onto jobs where the previous contractor had installed a door out of true, left the warranty unregistered, and disappeared. We’ve spent the years since building the opposite reputation in Coral Springs. Homeowners here call us because a neighbor on Northwest 110th Avenue or a cousin in Ramblewood told them the same thing: the crew shows up when they say, the door swings right, and the paperwork is actually done.
Every installation is covered by The Keystone Standard and the Done Right Promise. Both manufacturer warranty layers get registered in writing with durations stated before the truck leaves your driveway. If something isn’t right, we fix it, no fine print and no phone tag. Our technicians are background-checked and uniformed, and they measure every opening twice before ordering anything.
Scheduling for Coral Springs runs tight because we dispatch locally from our South Florida office, not from a call center in another state. Response time to most Coral Springs neighborhoods is same-week, and emergency board-up after a storm or break-in gets priority. Call (786) 743-5882 and a live person answers, 24 hours a day, 7 days a week.
Our Door Installation Services in Coral Springs
Entry & Swing Doors
Most Coral Springs entry door replacements happen in homes built before 1992, which means the original unit was installed under a code that didn’t require impact resistance anywhere in Broward County. Today every entry door in Coral Springs, even miles from the coast, must carry a Miami-Dade Notice of Acceptance or current Florida Product Approval. We quote compliant doors from start to finish; we won’t show you a non-impact door as a way to make a bid look cheaper.
A standard single entry door replacement in Coral Springs typically runs $1,200 to $3,200 including tear-out, new pressure-treated bucks where needed, anchoring to the concrete block, flashing, threshold, and trim. Fiberglass and steel impact-rated units fall in that range. Solid wood or custom glass differs.
Storm Doors
Storm doors are common on Coral Springs homes with east or south exposure, where afternoon sun and summer squalls hit the front of the house hardest. A storm door adds a layer of protection for the primary entry door and extends its life in this climate where UV breaks down weatherstripping and finishes fast. Typical storm door installation in Coral Springs runs $650 to $1,500 depending on glass type and hardware.
Be sure the primary entry door behind it isn’t the thing that actually needs replacing. If the main door’s jamb is pulling from the block or the slab has warped from twenty years of humidity, a storm door masks the problem rather than fixing it. We’ll tell you straight which one needs the work.
Arched & Custom Doors
Coral Springs has a real stock of custom and semicustom homes from the 1980s and early 1990s, particularly in the western neighborhoods, that were built with arched or radius-top entryways. When that door fails, a stock rectangular unit won’t work. We order arched and custom doors from manufacturers we know and trust, including CGI, ES Windows, and ECO Window Systems, and we handle the templating and installation so the arc matches the rough opening the first time.
Custom arched entry doors in Coral Springs run $2,800 to $7,500 depending on glazing, material, hardware, and the complexity of the frame rebuild. The permit and HOA path is the same as any other door, but the spec and the lead time are what make these jobs distinct.
Bifold & Folding Doors
Folding door systems show up on Coral Springs patio and interior room dividers with growing frequency as homeowners renovate those 1980s floor plans. TruePane installs bifold and multi-panel folding doors for interior and exterior applications, and we level and align the track system so every panel carries and locks as designed. Installation pricing starts around $1,800 and moves upward with panel count and impact glazing. You can see the full scope of our work on our Door Installation page.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Coral Springs
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Coral Springs homes we carry strong working relationships with CGI, ES Windows, and ECO Window Systems. That matters when you need an HVHZ-rated door in a specific size and masonry opening, and you need it ordered correctly the first time. We quote manufacturer lines side by side on paper so you see exactly what you’re buying, what it’s rated for, and what the warranty covers. Because we stock common replacement hardware and parts for these brands, warranty and tune-up calls in Coral Springs move faster than if we had to order everything from a distributor. We’re also the local crew for homes around Coral Springs, which means the person quoting your door knows the block construction, the wind-load requirements, and the HOA review process.
Common Door Installation Problems We See in Coral Springs Homes
Here’s what we find when a door comes off a Coral Springs house. These aren’t hypothetical; these are the regulars.
- Jamb pulling away from concrete block. Pre-1992 homes in Coral Springs often used undersized fasteners and minimal flashing. Years of wind and humidity loosen the connection, and the door starts binding or admitting draft. The fix is new pressure-treated bucks and proper anchors into the block.
- Non-impact doors installed before the HVHZ requirement. Every now and then we pull a door that was replaced in the 1990s or 2000s without a Notice of Acceptance. It’s been code-noncompliant the entire time it’s been up. We replace it with an NOA- or FPA-compliant unit and the permit closes right.
- HOA stop-work surprises. In The Hills, Cypress Run, and other deed-restricted neighborhoods, the architectural review board must sign off on a door replacement before or alongside the city permit. A contractor who skips the HOA step puts the homeowner in the crossfire. We check the HOA route on every Coral Springs door job.
- Flashing tape and threshold failure. South Florida humidity and rain loads rot out old flashing and compromise sweeps. When we replace a Coral Springs door, we replace the flashing and seal the threshold as part of the job. It’s not an add-on line item billed at the back end; it’s part of doing the job right.
Pricing for Door Installation in Coral Springs, FL
Here are straight numbers for Coral Springs. Entry door replacement runs $1,200 to $3,200. Storm doors run $650 to $1,500. Folding door systems start around $1,800 per panel group. Arched and custom doors run $2,800 to $7,500. These ranges include tear-out of the old door, minor framing correction, the new unit, anchoring, flashing, threshold, and finish trim. What moves the number: the size of the opening, whether the existing frame can be reused or must be rebuilt, the glazing package, hardware, and whether the HOA requires a specific style or finish. What does not change the number: surprise line items after the job starts. If we find something in the wall during tear-out, you get a written change order with a firm price before we touch it. Call (786) 743-5882 for an exact quote. Estimates are free.
We also honor a permanent 5% discount for seniors and veterans, plus a free written repair estimate. If the job stays under the thousand-dollar range, we’ll tell you that too.
We Also Serve Cities Near Coral Springs
TruePane runs crews daily into Margate, Coconut Creek, Pompano Beach, and Deerfield Beach. If you’re on the Coral Springs line in Margate or Coconut Creek, the same team and the same standards apply. Call (786) 743-5882 and ask for the Coral Springs crew; we’ll get you on the schedule.
Serving Coral Springs, FL - Our Local Coverage Area
We’re based in the Coral Springs area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Coral Springs
Coral Springs sits inside Broward County’s High-Velocity Hurricane Zone, and the HVHZ rules apply to the entire county, not just the beach. Every residential door replacement must carry a Miami-Dade Notice of Acceptance or a current Florida Product Approval for impact resistance, full stop. A contractor who installs a cheaper non-impact door in your Coral Springs home is selling you an illegal installation that will fail inspection and could void your insurance. Call (786) 743-5882 to get a free estimate on a compliant door.
Rarely. In most 1980s Coral Springs homes, the original door was set with fasteners and flashing that don’t meet current wind-load anchoring requirements. Once we remove the door slab and inspect, we usually find the jamb is loosened from the concrete block or the rough opening has shifted. Reusing the frame risks a door that binds again in the next wet season. We’ll inspect, show you what we find, and quote a rebuild only if it’s actually required. Call (786) 743-5882 and we’ll take a look.
The common finds are undersized or rotted framing, failed flashing tape, wiring run through the rough opening without a sleeve, and an opening that’s no longer square. In the Cypress Run neighborhood, a homeowner called us for a new entry door after noticing the old aluminum jamb pulling away from the concrete block. Our tech pulled the original 1984 door and found exactly those issues: undersized framing, failed flashing tape, and electrical wiring through the rough opening without a sleeve. We wrote a change order for new pressure-treated bucks, impact-rated glazing, and a Florida Product Approval-compliant door, priced and approved in writing before anything else came off the wall. That’s our protocol on every Coral Springs door pull: inspect first, show you, price the fix in writing, then proceed. Call (786) 743-5882 to schedule yours.
In many Coral Springs neighborhoods, yes. The city permit triggers the structural and code review. The HOA architectural review board triggers a separate approval for style, color, and sometimes brand. Neighborhoods like The Hills, Cypress Run, and Westchester enforce this actively. We handle both tracks on every Coral Springs door replacement. We file the permit, we submit the HOA package, and we schedule the installation after both clear. A contractor who skips the HOA step usually causes a stop-work notice and a homeowner confrontation with the board. Call (786) 743-5882 and we’ll run both approvals for you.
Because in Coral Springs, humidity and rain will find any gap in the flashing or threshold within a couple of seasons. Corrosion and wood rot accelerate in South Florida’s climate, and a door installed over old flashing or a dead sweep won’t stay watertight long. Replacing the flashing tape and sealing the threshold is built into our standard door installation price, not billed as an add-on. If your quote doesn’t include it, ask why. For a quote that includes it, call (786) 743-5882.
Call TruePane Windows & Doors for Door Installation in Coral Springs
We’ve spent years in this trade and the last decade and a half earning our name in Coral Springs. The way we see it, a door installation isn’t finished until the door swings true, the warranty is registered, and the permit is closed. If you’re in Coral Springs and you need a new entry door, storm door, or custom arched unit, call (786) 743-5882 for a free estimate. A live person answers at any hour, and we’ll walk you through exactly what your house needs.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Coral Springs and South Florida since 2008.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.