Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Installation Across Pompano Beach
Window installation in Pompano Beach runs $700-$2,800 per opening for most mid-range impact-rated units, with sliders and casements on the lower end and custom fixed picture windows on the higher end. If you’re calling from Cresthaven, Collier Manor, or anywhere east of Dixie Highway, we can usually have a technician at your door within 48 hours for a measure and written quote. Call (786) 743-5882 and a live person answers, day or night. This page covers what Pompano Beach homeowners actually need to know before ordering windows here, including the Broward County code requirements that catch out-of-county contractors every single week.
The thing most people don’t realize until a permit gets rejected: Pompano Beach sits entirely inside Broward County’s High-Velocity Hurricane Zone. Same designation as Miami-Dade. That changes which windows you can legally buy, how they get installed, and what your final inspection looks like. We’ll walk through all of it below.
Why TruePane Windows & Doors Is Pompano Beach’s Preferred Window Installation Company
We’re a second-generation glazier’s shop, founded by Dale Kessler in 2008, with a craft tradition that runs back many years in South Florida. We don’t run a franchise playbook and we don’t sub out our installs to whoever’s available that week. The techs who measure, order, and set your windows are background-checked, uniformed, and trained in-house. They measure every opening twice before a single product gets ordered.
Pompano Beach homeowners call us because we’ve already done the homework on Broward County’s HVHZ rules. We know that a stock slider with a standard Florida Product Approval gets failed on inspection here. We know that a 1965 CBS ranch in Pompano Park has rough openings sized for narrow-frame aluminum, not modern impact casements. We build that into the quote up front so nobody’s surprised when the permit comes back flagged.
Our standing promises are short and we keep them. Every job carries the Done Right Promise: if it’s not done right, we make it right, no paperwork and no arguing. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck leaves your driveway. That’s The Keystone Standard, and it applies to every window we set in Pompano Beach.
Window Installation is what we do every day, and we’ve been doing it long enough to know that homeowners here have been burned before. They remember the contractor who left them with a fogged seal and a door that binds in July. We’d rather spend an extra hour on the rough opening than have you call us back angry. The founding rule on Dale’s whiteboard hasn’t changed: if the pane is not true, the job is not done.
Our Window Installation Services in Pompano Beach
We install, replace, and service the full range of residential windows across Pompano Beach. Below are the four window types Pompano Beach homeowners ask us about most, with the local context that actually matters.
Casement Windows
Casement windows are the workhorse for Pompano Beach’s CBS ranch homes. They crank outward and seal tight against the frame, which matters when a summer storm drives rain sideways off the Atlantic. In neighborhoods like Collier Manor and Cresthaven, where the original 1960s jalousies are long gone or rotting out, we’re regularly replacing them with NOA-certified impact casements from Andersen or PGT. Salt-pitted aluminum frames near the Intracoastal get swapped for corrosion-rated hardware that won’t freeze up in two years.
Awning Windows
Awning windows hinge at the top and open outward, so they shed water better than almost anything else in a horizontal rain. They’re a common choice for bathrooms and kitchens in Pompano Beach’s older condo buildings along A1A, where the original openings are wider than they are tall. The catch: those 1960s jalousie openings are often non-standard dimensions, so a stock awning unit won’t fit without a custom order or a rough-opening rebuild. We spec and price that correctly the first time.
Fixed & Picture Windows
Fixed and picture windows are where Pompano Beach’s high-end work lives. Oceanfront and Intracoastal homes along Hillsboro Mile and the A1A corridor want big glass, and that means large-format impact-rated picture units. These are custom-ordered, long-lead items. The schedule is driven by the manufacturer’s production queue, not our labor. If a designer or architect is involved, we coordinate drawings, load calculations, and NOA documentation before anything gets ordered. The price is fixed in writing first.
Single & Double Hung
Single and double hung windows remain the most common replacement in Pompano Beach’s interior neighborhoods. They’re straightforward, they look right on a 1960s ranch, and they’re easier to clean than casements for the homeowner who doesn’t want to reach around a crank. But the same code applies: every hung window we install in Pompano Beach carries a Miami-Dade/Broward Notice of Acceptance. No exceptions, even for a single unit on a bedroom window in Pompano Park.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pompano Beach
We’re an authorized installer for more than a dozen manufacturer lines, and when Pompano Beach homeowners ask what we recommend, we put two or three options side by side on paper so they can see the real differences in price, warranty, and glass package. PGT and CGI are popular choices here because their impact lines are built for South Florida’s HVHZ code and carry the NOA documentation Pompano Beach inspectors look for. Ply Gem and CWS also make solid mid-range options for fixed and hung windows where code compliance is non-negotiable. We stock common hardware and balance parts locally, which means faster turnarounds for repairs and replacements across Pompano Beach, Coconut Creek, and Deerfield Beach.
Common Window Installation Problems We See in Pompano Beach Homes
We’ve replaced a lot of windows in Pompano Beach, and a handful of problems show up again and again. If any of these sound familiar, call us before you order anything.
- Florida Product Approval units that fail Broward inspection. Pompano Beach is in the HVHZ, same as Miami-Dade. A window that carries only standard Florida Product Approval, the kind an out-of-county contractor might specify because it’s cheaper, gets rejected by the county permit inspector. That’s a failed inspection, a delay, and a reorder on your dime if the contractor didn’t know better.
- Stock impact sliders ordered for non-standard 1960s jalousie openings. Along the A1A condo strip and in the older beachside neighborhoods, the original aluminum jalousie windows were built into masonry openings that don’t match any modern stock dimension. Contractors who order a standard HVHZ slider without measuring the rough opening first end up doing a full rough-opening rebuild on site. We caught this exact situation on a 1968 CBS ranch in Collier Manor, and the homeowner avoided a rebuild because we measured first and ordered custom.
- Aluminum frames with poor salt-corrosion ratings. Pompano Beach gets salt air from two directions: the Atlantic on the east and the Intracoastal Waterway on the west. Even homes several blocks inland get enough salt to oxidize cheap aluminum frames and rust steel hardware within two years. If a contractor specs the cheapest aluminum frame available, the windows will look bad and operate stiffly before the warranty is half used up.
- Skipped wood bucks on CBS rough openings. Most interior Pompano Beach homes built between 1955 and 1975 are concrete block and stucco, with rough openings sized for narrow-frame aluminum single-panes. Modern HVHZ-rated impact windows are deeper and heavier. You can’t anchor them directly into the concrete and expect a seal. Installing pressure-treated wood bucks inside the opening first is standard local practice, and if a quote omits that line item, the installation will be wrong.
Pricing for Window Installation in Pompano Beach, FL
We quote fixed prices in writing, and we don’t surprise you with change orders after the work starts. Here’s what Pompano Beach homeowners can typically expect to pay per window, installed, including the NOA-compliant product, wood bucking where needed, flashing, and permit documentation:
- Casement Windows: $900-$2,200 each, depending on size, brand (Andersen runs higher than Ply Gem), and whether the opening needs buck work.
- Awning Windows: $700-$1,600 each, with custom sizing on older A1A condos pushing toward the higher end.
- Fixed & Picture Windows: $1,200-$3,500 each. Large-format impact picture units on oceanfront homes can exceed $5,000 each.
- Single & Double Hung: $750-$1,800 each. Mid-range PGT or CGI hung units in standard 1960s openings usually land around $1,100-$1,400 installed.
- Sliding Windows: $850-$2,400 each. Non-standard 1960s jalousie openings require custom sizing, which adds 15-30% to the unit cost.
What moves the price in Pompano Beach: the age of your home and whether the rough opening is standard, how close you are to salt water, and whether your designer or architect has specified a particular brand. On high-end custom jobs, lead times drive the calendar more than labor. A custom picture unit from Marvin or ES Windows can take 8-14 weeks from order to delivery. We lock the price in writing before we order anything, so the schedule might shift, but your cost won’t.
Standing offers: a free written repair estimate, a maintenance check, and a permanent 5% discount for seniors and veterans. Call (786) 743-5882 and we’ll walk through your openings, your budget, and a realistic timeline for your specific home. The estimate is free.
We Also Serve Cities Near Pompano Beach
If you’re in Coconut Creek, Margate, Deerfield Beach, or Coral Springs, our crews serve those areas the same way we serve Pompano Beach: local techs, fixed pricing, and every window specified to the correct code. Call the same number, (786) 743-5882, and you’ll reach a live person who can schedule a measure and quote.
Serving Pompano Beach, FL - Our Local Coverage Area
We’re based in the Pompano Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Pompano Beach
Because Pompano Beach falls entirely inside Broward County’s High-Velocity Hurricane Zone, the same strict wind-load and impact standard as Miami-Dade. A Miami-Dade/Broward Notice of Acceptance is the specific product certification that proves a window has been tested and approved for HVHZ installation. Standard Florida Product Approval, which is what Palm Beach County homes just north accept, does not satisfy Pompano Beach’s permit review. If your contractor specifies a Florida Product Approval unit here, the permit gets rejected and you’re paying for the mistake. Call (786) 743-5882 and we’ll check the NOA on your quote before you sign anything.
Almost always, yes. Cresthaven and the surrounding interior Pompano Beach neighborhoods were built as CBS (concrete block and stucco) homes between 1955 and 1975. The rough openings in those concrete walls were sized for narrow-frame single-pane aluminum windows. Modern HVHZ-rated impact windows are deeper and heavier, and they can’t be anchored directly into the concrete without leaving gaps and leaks. Pressure-treated wood bucks go inside the opening first, then the new window anchors to the buck. We include buck work in our fixed Pompano Beach quotes. Call (786) 743-5882 and we’ll tell you if your openings need it.
Sometimes, but not always. The original jalousie windows on A1A condo towers from the 1960s and 70s were built into masonry openings that are often non-standard dimensions. A stock HVHZ impact slider will not fit without either a custom-sized NOA-approved unit or a full rough-opening rebuild. If you reuse the opening, you’ll most likely need a custom order. We measure first, confirm the NOA on the custom unit, and price it before we order anything. Call (786) 743-5882 and we’ll tell you what your specific building allows.
Salt air attacks frames and hardware from two directions in Pompano Beach: the Atlantic on the east and the Intracoastal Waterway on the west. Aluminum frames oxidize, steel hardware rusts, and vinyl weep-hole covers clog with salt deposits, even on homes several blocks inland. The fix is specifying frames and hardware with corrosion ratings built for coastal exposure. We recommend brands and hardware lines that hold up within a mile of salt water. Call (786) 743-5882 and we’ll spec your windows for your actual distance from the water.
Manufacturer lead times, not labor. On custom fixed and picture windows, especially large-format impact units from Andersen, Marvin, or ES Windows, production can run 8-14 weeks from order to delivery. Our installation takes a day or two per opening. The calendar is set the day the order goes to the manufacturer, which is why we confirm every dimension, NOA number, and finish before we place it. The price is fixed in writing first, so the schedule may stretch, but the cost won’t. Call (786) 743-5882 and we’ll give you a straight answer on current lead times.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pompano Beach and the surrounding Broward County communities with years of craft heritage.
For a free, fixed-price window installation quote in Pompano Beach, call (786) 743-5882. A live person answers 24 hours a day, 7 days a week. We’ll measure twice, spec the right NOA-approved windows for your home, and stand behind the work with the Done Right Promise.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.