Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterSimonton Sliding & Patio Doors in Deerfield Beach: What to Know First
We repair and replace Simonton sliding and patio doors throughout Deerfield Beach, and most jobs are done in a single visit. A typical Simonton sliding door repair in this area runs $180 to $450, while full door replacement starts around $1,800 and goes up based on glass package, size, and impact rating. We are an independent service provider, not a factory-authorized dealer, which means we make parts and repair decisions that serve the homeowner’s long-term interest, not a manufacturer’s replacement agenda. If you have a Simonton door that binds, leaks, or will not lock, call (786) 743-5882 and a live person answers.
How Simonton Products Fail, and How We Fix Them
Simonton builds a solid mid-tier vinyl door, but after 8 to 15 years of Deerfield Beach humidity and salt exposure, certain failures repeat across the sliding and patio lines we service. Here is what we actually see in the field:
- Roller assembly collapse on the 6100 and 6500 series. The original steel rollers corrode from constant exposure to beach air; the bearing seizes, and the door starts dragging or gouging the track. We replace the assemblies with stainless-steel aftermarket rollers that outlast the OEM parts and adjust the door so it glides without lifting the frame.
- Latch misalignment on the 6800 series. As the concrete slab settles, even a quarter inch of movement prevents the latch from engaging or the multipoint lock from throwing. We check reveal gaps at the header and sill, correct the roller height, and re-mortise the strike rather than just drilling new holes.
- Weep hole blockage causing sill rot in the track channels. Simonton sills drain through small weep openings that clog with sand and salt crust in Deerfield Beach. Water backs up, the vinyl track filler degrades, and the frame starts holding moisture. We clear the weeps, verify the sill is pitched correctly, and replace the track cap where erosion has started.
- Seal failure in the ProSolar Low-E glass packages. On east and southeast exposures near the water, we see the insulated glass unit lose its seal faster than the brochure suggests. Condensation between the panes means the desiccant is spent and the IGU needs replacement, not a sealant patch.
- Screen track wear on the 7500 and 9500 patio door models. The aluminum screen frames deform after years of salt air, and the fiberglass mesh tears along the bottom rail. We re-fabricate the screen panel to the exact track dimensions rather than forcing a sloppy aftermarket fit.
Our Simonton Sliding & Patio Doors Process
Every Simonton job follows the same sequence whether it is a roller replacement or a full door swap. No shortcuts, no surprises on the bill.
- 1
Call and diagnosis. You call (786) 743-5882, a live person answers, and we ask enough questions on the phone to know whether we are sending a tech with rollers, glass, or a full replacement door on the truck.
- 2
Measure and inspect. The technician measures the rough opening twice, checks the sill for level, and reads the frame the way Dale Kessler was taught: honestly, not in a way that keeps the estimate low enough to win the job.
- 3
Parts decision. We show you the OEM price and a quality aftermarket option side by side on paper. For rollers, we typically recommend aftermarket stainless. For glass, we recommend OEM-spec IGUs. You decide with the numbers in front of you.
- 4
Repair or replacement. We do the work the same visit in most cases. Frame work is shimmed and squared before a single screw goes in. If the pane is not true, the job is not done.
- 5
Warranty registration. Before the truck leaves the driveway, we register both manufacturer warranty layers in writing and hand you the paperwork with durations stated. That is The Keystone Standard.
- 6
Cleanup and test. We clean the track, test the door open-closed-lock cycle a full ten times, and walk you through what we did. The Done Right Promise covers the work.
What Simonton Sliding & Patio Doors Costs in Deerfield Beach
We give written line-item quotes, not verbal guesstimates. Here is what current Deerfield Beach pricing looks like:
| Job Type | Typical Range |
|---|---|
| Roller replacement, single panel | $180 – $290 |
| Track repair or replacement | $200 – $400 |
| Latch / multipoint lock repair | $150 – $325 |
| Insulated glass unit replacement | $350 – $850 |
| Full Simonton sliding door replacement | $1,800 – $4,900 |
What moves the price is the glass package. Impact-rated ProSolar or StormBreaker Plus glass adds $800 to $2,200 depending on size and design pressure rating. Frame size costs more than you think because Deerfield Beach wind load requirements run higher than inland Broward. Every estimate is free, and the number we quote is the number you pay. Call (786) 743-5882.
Why Deerfield Beach Homeowners Call TruePane Windows & Doors for Simonton Work
Deerfield Beach homeowners have been calling us since 2008 because we act like a company that plans to be here in thirty more. We know which Simonton parts hold up in this salt air and which ones do not. We carry stainless aftermarket rollers, OEM-spec glass, and track hardware for the 6100, 6500, 6800, and regional and premium lines. If the door is too far gone, we quote Andersen, Pella, and PGT side by side so you see exactly what your money buys. The Done Right Promise has no fine print. If the work is not done right, we make it right. We stand behind it.
FAQs
Yes. Most Simonton sliding door parts including rollers, latches, track caps, and IGUs are still available through our supply chain in South Florida, even for discontinued lines like the 6100 series. We stock the most common replacement parts on our trucks for a one-visit repair.
No, not when the repair is done correctly. As an independent Simonton service provider, we use OEM-spec parts where the warranty requires it and document every job with you. We register both warranty layers in writing so nothing gets voided by poor paperwork. If you are unsure, call (786) 743-5882 and we will explain exactly what your existing warranty covers.
Repair first unless the frame is warped, the glass is failed in both panes, or the door is over 20 years old and failing in three or more areas. We have seen well-maintained Simonton doors last 20-plus years in Deerfield Beach, but a frame that is out of square from slab movement usually means replacement is the honest call. We will show you the repair and replacement numbers and let you decide.
Most stuck-door calls are handled same day or next day in Deerfield Beach because we carry the common failure parts on the truck. A dragging door is a safety issue, not just an annoyance, so we prioritize calls where a door will not close and lock.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Deerfield Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.