CGI Window Installation Nationwide | TruePane Windows & Doors

CGI Window Installation: The Deerfield Beach Owner’s Guide

CGI window installation in Deerfield Beach typically runs $180 to $420 per window for labor when replacing an existing CGI unit, with the full installed cost landing between $850 and $2,400 depending on the series, size, and whether the frame needs correction. We stock CGI-compatible hardware and can usually complete a straight swap the same day we arrive. Most homeowners discover the problem the way you just did: a window that no longer closes square, a crank that spins without moving the sash, or a corner joint that has started to separate after years of salt air working on the frame.

Call (786) 743-5882

CGI builds its windows for hurricane zones, which means the hardware is heavier and the tolerances tighter than what you would find on a stock window from a big-box store. That is good news for storm protection and bad news for anyone trying to install one without reading the spec sheet first.

Which CGI Models This Applies To

We install and service the full CGI window line, including the Estate Collection, the Sentinel series, and the older Classic and Targa lines still in service across Deerfield Beach, Lighthouse Point, and Hillsboro Beach. The trick with CGI is that parts are not universal across series. A roller assembly from a Sentinel will not necessarily seat correctly in a Classic frame, and the balance systems changed between production years even within the same series line.

Before you order anything, check the corner of the sash or the frame channel for a small foil label with the CGI series name and a four-digit production code. If that label has worn off, which happens often in coastal sun, we can match the part by measuring the extrusion profile and the hardware mounting points. On the OEM versus aftermarket question: for seals, rollers, and balances, a quality aftermarket equivalent usually performs as well as the factory part at roughly 30 to 40 percent less. For the extrusion itself and the laminated impact glass, OEM is the only choice that preserves the manufacturer warranty. We quote both options side by side on paper so you can see the difference before you commit.

One compatibility gotcha worth knowing: CGI’s laminated glass units are cut thicker than standard insulated glass, which means the glazing bead and the gasket channel have to be matched to the exact glass build. A bead that fits a standard double-pane will not seat over CGI’s impact laminate. We see this mistake on installations that were not done by an authorized CGI dealer.

Signs Your CGI Window Installation Is Failing

• The sash drags or binds when you open it. This usually means the roller or balance has worn unevenly, or the frame has settled slightly out of square. In Deerfield Beach, humidity cycles swell and shrink wood framing around the rough opening, and a window that was square in January may bind by August.
• The crank turns but the sash doesn’t move. The gear inside a CGI casement operator is designed to shear before the sash twists, which is a safety feature, not a defect. When it shears, the operator needs replacement, not adjustment.
• You feel air moving around the closed sash. The weatherstripping on CGI windows is a compressible bulb seal that hardens over time. After roughly 10 to 14 years in salt air, it loses its rebound and leaves a gap you can feel on a windy day.
• Condensation forms between the panes. This is a failed seal on the insulating glass unit. On CGI laminated glass, you cannot simply reglaze the unit; the entire sash insert gets replaced to keep the impact rating intact.
• The corner welds are separating. CGI welds its vinyl corners under heat and pressure. When a weld starts to open, the window is no longer meeting its design pressure rating. That is a replacement issue, not a caulk-and-hope issue.

Replacement Cost & What’s Included

Here is what we quote in the Deerfield Beach market for CGI window replacement, installed:

• Single-hung or casement sash insert: $850 to $1,400 per window
• Full frame replacement, standard size: $1,200 to $1,900 per window
• Full frame replacement, oversized or custom: $1,800 to $2,400 per window
• Hardware-only repair (operator, balance, roller, latch): $85 to $220, most done in one visit

The range depends on the glass build, the series, and whether the rough opening needs correction before the new unit goes in. Every quote we write includes the parts, the labor, the haul-away, and the registration of both manufacturer warranty layers in writing before we leave the driveway. No change orders, no surprise line items. If it is not in the contract, it is not in the scope.

Our work carries the Done Right Promise. If something is not right, we make it right. No paperwork fights, no arguing about what the fine print covers.

DIY or Call Us?

There are a few things you can safely check on a CGI window: wipe down the track, remove debris from the weep holes, and confirm the lock is not bent. Those are maintenance items, not repairs. What you should not do is attempt to pull a CGI sash out of its frame without knowing how the balance system releases. These sashes are heavy. A single CGI laminated impact sash can weigh 40 pounds or more, and when a balance lets go under tension, it can take a hand with it. We have been called to more than one Deerfield Beach home where a weekend project turned into a broken window and a bruised ego.

If the problem is a hardware swap or a sash insert, the work is fast when the right part is on hand. We stock the most common CGI rollers, balances, operators, and seal kits on the truck. Call us at (786) 743-5882 and describe what the window is doing. We will tell you straight whether it is a service call or a replacement, and what it will cost before we schedule anything.

FAQs