Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Energy-Efficient Windows in Deerfield Beach: What to Know First
CGI energy-efficient windows in Deerfield Beach typically cost between $850 and $2,400 per opening installed, depending on the series, glass package, and whether the existing frame can be reused. Most jobs are completed in a single visit once the glass is ordered, which usually takes one to two weeks. We are an independent CGI service provider, not a manufacturer-authorized dealer, which means we quote repairs and replacements on the actual condition of your openings rather than on a sales target. If you own a CGI window that is fogged, leaking air, or failing a UV fade test, call (786) 743-5882 for a straight answer. This page is for Deerfield Beach homeowners who want the energy performance they paid for, and who do not want to hear a sales pitch first.
How CGI Products Fail - and How We Fix Them
- Fogged glass on CGI Estate Collection and Targa series units. These are common in Deerfield Beach because salt air works on the perimeter seal, and a ten-year-old seal that looked fine last season can fail quietly after one hard summer. We see this most often on west-facing elevations where the afternoon heat loads the glass daily. The fix is a full insulated glass unit replacement, not a seal repair, because the desiccant inside the spacer has already saturated and no amount of resealing brings back the clarity or the Low-E performance.
- Low-E coating degradation presenting as a milky film on CGI 900 Series windows. This is not a cleaning issue. The soft-coat Low-E layer on some early-production 900 Series units can oxidize after years of salt and humidity exposure, especially in homes within a mile of the Intracoastal. We confirm with a meter, then replace the glass package with a modern dual-seal Low-E unit. The frame is usually fine, and that matters because replacing the whole window would cost triple what the glass replacement costs.
- Air infiltration around the sash on CGI Estate Collection double-hungs. The weatherstripping on these units is a formed vinyl profile that flattens over time and stops rebounding. Homeowners notice it as a draft in August near the sill or as a higher AC bill they cannot explain. We replace the weatherstripping with a profile that matches the original groove and verify the sash-to-frame gap around all four sides before we call the job done.
- Argon gas loss in double-pane CGI Targa windows showing condensation between panes. In Deerfield Beach, we see this after long exposure to high humidity cycles. When the argon leaks out, the window loses about half its insulation value, and the interior glass surface temperature shifts enough to trigger condensation even at our mild winter lows. We replace the sealed unit and verify the new package with a gas fill gauge before installation so you are not paying for argon you are not getting.
- Frame-to-wall seal failure on CGI 900 Series fixed units installed with older caulking systems. The original polyurethane caulk from many early-2000s installs hardens and pulls away from the stucco or concrete block, leaving a path for water and air. We remove the old sealant, backer-rod the joint properly, and apply a marine-grade sealant rated for Broward County humidity and UV. This is a two-day job because the sealant needs cure time, not because the repair is complicated.
Our CGI Energy-Efficient Windows Process
- 1
Call and diagnosis. A live person answers at (786) 743-5882, asks what you are seeing, and schedules a visit. We do not route you through a call center or a callback form.
- 2
On-site measurement and testing. Dale Kessler grew up a few blocks from Quiet Waters Park, so he knows what Deerfield Beach salt air does to aluminum and glass. Our tech measures every opening twice, tests the gas fill where condensation or fog is present, and reads the rough opening honestly. If the frame is sound, we tell you. If it is not, we show you before we quote.
- 3
Parts decision on paper. For CGI jobs, we quote OEM glass packages where the warranty is still active and the line is in current production, and we quote quality aftermarket insulated units where the original is discontinued or the warranty has lapsed. The difference, the price, and the performance numbers are written side by side. If it is not in the contract, it is not in the scope.
- 4
The repair or replacement. We remove the old sash or glass pack, prep the frame, set the new unit, and re-weatherstrip as needed. Every tech is background-checked and uniformed. We work in your home the way we would work in our own mother’s.
- 5
Verification and cleanup. We test the new unit for square, for seal, and for gas fill where applicable. The work area is left clean enough that you would not know we were there except for the new glass.
- 6
Warranty registration before we leave. Both manufacturer warranty layers are registered in writing, with durations stated, before the truck leaves your driveway. That is The Keystone Standard, and we have been doing it that way since 2008.
What CGI Energy-Efficient Windows Costs in Deerfield Beach
CGI energy-efficient window work in Deerfield Beach breaks down into a few honest ranges. A single insulated glass unit replacement for a fogged or failed CGI window runs $350 to $650 for glass, plus $150 to $300 for labor and materials, so most single-window glass jobs land between $500 and $950. A full sash replacement on a CGI Estate Collection double-hung, including new weatherstripping and balancing hardware, runs $700 to $1,200 per opening. A complete window replacement in the same opening, frame and all, runs $1,200 to $2,400 depending on the series and glass package you choose. What moves the price: the size of the opening, whether the frame is salvageable, whether you want Low-E with argon or a triple-pane upgrade, and whether the window is on an upper floor. We offer a permanent 5% discount for seniors and veterans, and a free written repair estimate. Call (786) 743-5882 for a free written estimate with no surprise line items.
Why Deerfield Beach Homeowners Call TruePane Windows & Doors for CGI Work
We have been serving local communities since 2008, and TruePane Windows & Doors was founded by Dale Kessler in 2008 because he kept seeing out-of-true installs and voided warranties that should never have happened. We stand behind the work with the Done Right Promise: if it is not done right, we make it right, no paperwork and no arguing. Our techs know CGI windows specifically, which matters when a homeowner is deciding between a $500 glass replacement and a $2,000 full replacement and wants a straight answer. We are also an authorized installer for, PGT, and more than a dozen other lines, so when a CGI frame is too far gone or a discontinued part is no longer available, we can quote a comparable replacement side by side and you can see exactly what you are buying. A live person answers the phone 24 hours a day, 7 days a week. We will be there when we say.
FAQs
Glass replacement for a fogged or failed CGI window in Deerfield Beach runs $500 to $950 per window installed, depending on size and whether you need Low-E with argon or a triple-pane upgrade. Full window replacement, frame included, runs $1,200 to $2,400. Call (786) 743-5882 for a free estimate with exact numbers in writing.
A fogged CGI window needs the sealed glass unit replaced, not the whole window. The frame is usually fine, and replacing only the glass package costs roughly a third of a full window replacement. We confirm the failure on site before we quote anything.
As an independent CGI service provider, we cannot extend or preserve the original manufacturer warranty, but we register every warranty layer that applies to the new glass package in writing before we leave. We also quote OEM glass where the original warranty is still active and the line is in production, so you have a clear choice on paper.
Most CGI glass replacements are completed in a single visit once the unit is ordered, and ordering typically takes one to two weeks. Full frame replacements take one day for a standard opening, longer if the rough opening needs repair. We will be there when we say, and a live person answers the phone around the clock at (786) 743-5882.
Yes. Every job is covered by the Done Right Promise: if it is not done right, we make it right, with no paperwork and no arguing. Both manufacturer warranty layers on the new glass are registered in writing before the truck leaves your driveway. That is The Keystone Standard, and it has been our baseline for over four decades.
If you own CGI windows in Deerfield Beach and the glass is fogged, the frame is drafting, or the AC bill keeps climbing, call (786) 743-5882. We will measure, test, and quote a square deal in writing. No surprise line items, no sales pitch, just the work done right.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Deerfield Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.