Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Impact Windows in Deerfield Beach: What to Know First
We repair and replace CGI impact windows throughout Deerfield Beach as an independent CGI service provider, not a manufacturer affiliate. Most CGI impact window repairs in this area take a single visit, and most jobs run between $280 and $1,450 depending on what actually failed. You’ll get a written line-item quote before any work begins, and we register both warranty layers before the truck leaves your driveway. Call (786) 743-5882 for a free estimate.
This page is for homeowners who already own CGI impact windows or are considering them for a Deerfield Beach property. If you’ve got a window that won’t close square, a frame that’s starting to pit, or a laminate that’s showing haze between the panes, you’re in the right place. We’re TruePane Windows & Doors, and we’ve been setting glass true in South Florida since 2008 under Dale Kessler’s craft standard: if the pane is not true, the job is not done.
How CGI Products Fail - and How We Fix Them
CGI builds a solid impact window. But salt air, humidity, and twenty years of sun exposure find the weak points in any product, and we see the same failure patterns repeat across Deerfield Beach neighborhoods from The Cove to Crystal Lake. Here’s what we actually find on service calls.
- Roller and track fatigue on CGI Estate Collection sliders. The Estate Series horizontal slider carries a lot of glass weight, and the rollers are the first thing to go. Symptom is a panel that drags or binds about halfway across the track. The real cause is usually roller bearing wear combined with salt grit compacted into the track channel. We replace the rollers, clean and re-lube the tracks, and set the panel height so the lock engages without lifting.
- Laminate haze at the edges of CGI Sentinel Series casements. Owners sometimes mistake this for a seal failure and think the whole sash is done. What’s actually happening is the low-E coating oxidizing at the laminate edge where salt moisture gets in through worn weatherstripping. If caught early, we replace the weatherstripping and stop the moisture path. If it’s gone too far, the sash gets a new insulated glass unit. The CGI frame itself is usually fine.
- Weep hole blockages on CGI Tribute Series single-hungs. Deerfield Beach sits close enough to the ocean that wind-driven rain carries fine salt and sand into the bottom track. When the weep holes plug, water backs up and seeps into the frame channel, eventually reaching the interior sill. We clear the weep system, check the sill slope, and often upgrade the weep covers to a larger-drainage design. It’s a twenty-minute fix that prevents a much bigger problem.
- Hardware corrosion on CGI 960 Series fixed and casement windows. The stainless hardware CGI uses is good, but nothing in coastal Deerfield Beach is truly corrosion-proof. Hinges get stiff, lock levers get gritty. We don’t force anything. We disassemble, clean the corrosion, lubricate with a marine-grade product, and replace any hardware that’s structurally compromised. OEM replacement hardware is available for most CGI lines and we stock the common pieces.
- Out-of-square openings after settlement or storm racking. This isn’t a CGI defect, but it’s the most common reason a CGI window starts jamming or the operator crank feels like it’s fighting you. The frame has shifted. A homeowner can’t fix this with shims and patience, and trying to crank harder only damages the operator gears. We re-square the opening, reset the frame with proper flashing, and the window works like it did when it was installed.
Our CGI Impact Windows Process
Every CGI job starts the same way: you call (786) 743-5882 and talk to a person, not a phone tree. From there, here’s how the work unfolds.
- 1
Measure and diagnose. We open the window, check the opening with a folding rule, and find what actually failed. Not what’s easiest to bill for, what’s actually wrong.
- 2
Parts decision on paper. For CGI lines we show you OEM parts pricing alongside quality aftermarket options where they exist. You see the difference in writing before you choose.
- 3
Written line-item quote. If it’s not in the contract, it’s not in the scope. That’s the rule Dale Kessler keeps on the whiteboard, and it applies to every estimate we hand a homeowner.
- 4
The repair or replacement set true. We set the frame square, install the glass or hardware, and torque every fastener to manufacturer spec. Uniformed, background-checked techs, working like they’re in their own mother’s house.
- 5
Operation test and weather seal check. We cycle the window, check the seal, run water where it matters, and confirm the lock engages without a fight.
- 6
Warranty registration before we leave. Both manufacturer warranty layers get registered in writing, with durations stated, before the truck pulls out of your driveway.
What CGI Impact Windows Costs in Deerfield Beach
Here’s the square deal on pricing for common CGI impact window work in the Deerfield Beach market. These are real ranges from jobs we do regularly, not national averages.
- Single panel roller and track service: $280 to $420
- Weatherstripping replacement on one window: $180 to $310
- Insulated glass unit replacement: $520 to $950 depending on sash size and glass spec
- Hardware rebuild (hinges, locks, crank operator): $240 to $480
- Full-frame window replacement with CGI product: $900 to $1,450 per opening, installed
What moves the price is the sash size, the glass package, whether the frame needs re-squaring, and how accessible the opening is. A second-story window takes longer than a ground-floor slider. You’ll never see a surprise line item on our bill. Call (786) 743-5882 and we’ll put a written number in front of you for free.
Why Deerfield Beach Homeowners Call TruePane Windows & Doors for CGI Work
We’re a local company that’s been doing this since 2008, and we plan to be here in thirty more. Our techs know CGI product lines because they’ve serviced them up and down the A1A corridor for years. If a CGI replacement doesn’t make sense for your opening, we install and service PGT, CWS, ES Windows, and ECO Window Systems too, so you get a straight answer on what belongs in your house, not a hard sell on one brand. Every job carries our Done Right Promise: if it’s not done right, we make it right, no paperwork and no arguing. A live person answers our phone 24 hours a day. And when the work is finished, both warranty layers are registered in writing before we leave.
FAQs
No, not when the work is done correctly with the right parts. As an independent CGI service provider, we use OEM components where they matter and follow manufacturer installation specs, so your warranty stays intact. We register both warranty layers in writing on every job so there’s no gray area later. Call (786) 743-5882 if you want us to walk through the warranty status on your specific window.
Most single-window repairs are done in one visit, usually two to three hours including setup and testing. If we’re replacing an insulated glass unit, the glass has to be cut and laminated to spec, which typically adds a few days of lead time before the install visit. We’ll tell you the timeline in writing before any work begins.
That depends on the frame. If the CGI frame is square and solid, repair is almost always the smarter money. If the frame has pitted, the opening has racked, or the laminate has gone beyond edge haze, replacement starts making sense. We’ll tell you which one you actually need, and we’ll show you the numbers side by side on paper.
We service CGI impact windows and doors, including hinged terrace doors and sliders. The tracks, rollers, and hardware on CGI doors see the same salt-air wear as windows, and the repair approach is the same: diagnose the real failure, fix it with the right parts, and stand behind it in writing.
Call us immediately at (786) 743-5882. A window that won’t close square and latch is a safety issue, especially in Deerfield Beach where hurricane season is a reality, not a hypothetical. We’ll get a tech to your house, get the panel set and secured, and then talk about a permanent fix once the immediate problem is handled.
Call (786) 743-5882 to schedule your free estimate. We’ll measure, diagnose, and put the number in writing before you commit to anything.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Deerfield Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.