Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterCGI Roof Repair in Deerfield Beach: What to Know First
CGI roof repair in Deerfield Beach means fixing the aluminum frame, glazing, fasteners, and sealant system around a CGI impact-rated window or door unit mounted at the roof line, a skylight curb, or a roof deck opening. We are an independent CGI service provider, and most repair calls we take are completed in a single visit once we have the right parts on the truck. Pricing lands between $275 and $1,100 for the majority of jobs, and we give you a written line-item quote before the first tool comes out.
This page is for homeowners in Deerfield Beach who already own CGI windows, doors, roof glazing, or a CGI roof-access hatch and want a repair that holds. If you have a leak, a cracked pane, a frame pulling away at the roofline, or a unit that is binding after a storm, call (786) 743-5882 and we will tell you honestly whether it is a repair or a replacement. No hour-long sales pitch. We measure, we diagnose, and we quote.
How CGI Products Fail - and How We Fix Them
CGI builds a strong product, but Deerfield Beach has a way of finding the weak points in any impact-rated assembly. Here are the failure modes we see most often on roof-adjacent CGI units, and what we actually do about them.
- CGI Estate Collection roof glazing with failed structural silicone at the setting block line. The Estate Collection fixed roof units rely on a continuous silicone seal between the insulated glass unit and the aluminum frame. After six or seven years of salt air and afternoon sun, that seal can lose adhesion along the bottom edge, and water finds its way in even though the glass looks fine. We cut out the old silicone with a knife that won’t score the glass, clean the glaze channel to bare metal, and re-bed the unit with a marine-grade structural silicone rated for South Florida UV.
- CGI Sentinel Series roof deck doors with worn hinge-side rollers that cause frame racking. The Sentinel slider is a workhorse, but when roof deck doors get opened and closed in high salt and humidity, the roller assemblies corrode faster than the frame. The door starts dragging, then it racks, and the top corner pulls away from the roof flashing. We replace the roller hardware with stainless assemblies, re-square the panel, and re-flash the top leg of the frame. That is a repair a lot of general contractors turn into a replacement quote.
- CGI Targa Series casement units mounted at the roof line with stripped hinge fasteners. The Targa by CGI uses extruded hinges that hold a surprising amount of panel weight. When the original install used fasteners that were a half-size too short, those screws eventually strip out of the aluminum frame, and the sash starts sagging within a year or two. We drill, re-tap, and set the hinges with the correct length fastener in a marine-grade thread compound. Then we re-test the reveal so the panel closes flat.
- CGI Clarity line glass balustrade anchors pulling at the roof penetration points. Clarity railings around roof terraces take a beating from wind and thermal movement. The anchor points at the waterproofing membrane are the usual failure point, and once water gets under the base plate, you get efflorescence and slow subsurface rot in the wood blocking. We remove the rail sections, re-seal the penetrations with a urethane mastic, re-bed the plates, and torque the anchors to the specs CGI publishes for the series.
- Older CGI fixed roof lights with failed gasket returns and fogged insulated glass. Units from the mid-2000s used a butyl tape and snap-in glazing gasket system that loses its memory after enough South Florida summers. The gasket shrinks, the butyl degrades, and the unit fogs from the bottom edge inward. We can re-glaze most of those units with a new insulated glass unit and modern gasket profile without changing the frame, provided the frame itself tests true.
Our CGI Roof Repair Process
Here is how a CGI roof repair goes when you call TruePane Windows & Doors in Deerfield Beach.
- 1
Call and talk to a person. You describe the symptom. We ask about the unit location, age, and any water you have seen. If we think it is an emergency leak, we will tell you exactly what to put in place to slow it down until we arrive.
- 2
On-site diagnostic. We come out, get up on the roof or the ladder, and inspect the frame, glazing, seals, and flashing. We do not quote a repair over the phone without looking at the unit, because a leak at the glass line and a leak at the roof flashing are two different jobs.
- 3
Parts decision. We prefer CGI factory parts when the warranty is active and the part is still available. When a series is discontinued and the OEM part has a 12-week lead time, we source a quality aftermarket equivalent that matches the frame geometry and impact rating. We tell you which we are quoting and why, in writing.
- 4
Written quote, no surprises. You get a line-item price before we start. If the job needs a permit, we tell you that upfront and include it in the number. If it does not, we say so. There is no change order after the fact for something we could have seen on the first visit.
- 5
The repair. We do the work carefully, protect the roof membrane, keep the site clean, and register what needs to be registered. Most jobs are finished in one visit.
- 6
Test and walkthrough. We water-test the unit, re-check the reveal and operation, and walk you through what we did before we leave. The work is covered by our Done Right Promise, in writing, no fine print that covers neither.
What CGI Roof Repair Costs in Deerfield Beach
CGI roof repair in Deerfield Beach runs from about $275 for a simple sealant and gasket job to $1,500 or more when the frame has racked and we need to pull the unit and re-set it in the opening. Here is how the common jobs break down.
- Reseal a leaking roof-light or fixed unit: $275 to $525, depending on the lineal footage of the glaze channel.
- Replace a single insulated glass unit in a fixed roof light: $450 to $850, including the new IGU, new glazing gasket, and structural silicone.
- Re-hang a sagging or binding roof deck door: $350 to $700, including stainless hardware and re-flashing.
- Re-anchor a glass balustrade roof section: $400 to $900 for a multi-anchor run, plus any membrane repair.
- Full frame re-set of a racked roof unit: $800 to $1,500, depending on size and access. This is the repair you do once instead of replacing the whole assembly.
What moves the price is access, frame condition, and whether we are dealing with an active warranty. The honest answer: we have to see it before we commit to a number. Call (786) 743-5882 and we will give you a written quote with no pressure and no number that changes once we start.
Why Deerfield Beach Homeowners Call TruePane Windows & Doors for CGI Work
We have been doing this work long enough to know that a CGI unit on a Deerfield Beach roof is not the same as a window on an interior wall. The salt, the UV, the thermal movement, the roof deck membrane all play into how the repair holds. Dale Kessler grew up a few blocks from Quiet Waters Park, and he has watched salt air eat aluminum frames off houses that should have been re-glazed years earlier. That is why we treat every CGI repair as a roofing job and a glazing job at the same time.
We also work on PGT, CWS, ES Windows, and ECO Window Systems, which means we understand how CGI sits in the broader impact-rated landscape. If the honest call on your roof unit is that it is beyond repair, we will tell you that and show you why, with the numbers side by side. We stand behind every job for 90 days with no arguing. Our techs are background-checked, uniformed, and trained to work in your home the way they would work in their own mother’s. If the pane is not true, the job is not done.
FAQs
It depends on what failed and whether the unit is still under warranty. We are an independent CGI service provider, and when the warranty is active we go through the proper channels to order factory parts and follow the repair protocols CGI specifies. Some warranty work requires CGI authorization before the repair; we will tell you if that applies to your job. Either way, we never do a field modification that would knowingly void a warranty the homeowner could have used.
In most cases, yes. CGI uses a range of standard finishes including white, bronze, and clear or dark anodized, and we match the finish on the repair parts we order. When a discontinued finish is no longer in production, we tell you that before we order anything, and we show you the closest available match on paper. You approve it before we start.
We move on roof leaks quickly because water left sitting finds the drywall, the membrane, and the structural framing before long. Call (786) 743-5882 and a live person will answer. We will schedule the diagnostic as quickly as the truck schedule allows, and for active leaks we will give you a temporary mitigation plan over the phone so you are not standing there watching the ceiling stain deepen.
We do both. We repair anything that is worth repairing, and we are straightforward about the line where repair stops making financial sense. If a CGI roof unit has failed at the frame, the IGU, and the flashing all at once, a new unit is usually the right call. We will quote both side by side and tell you which one we would do on our own house. That is how we have kept people coming back for years.
It means TruePane Windows & Doors is not affiliated with or authorized by CGI. We are an independent installer and service company that works on CGI product every week in Deerfield Beach. We know the product lines, the failure modes, and the parts sourcing, and we approach every repair with the same care we would if we had our own name on the manufacturer’s label.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Deerfield Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.