Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
CGI Sliding Glass & Patio Doors in Deerfield Beach: What to Know First
CGI sliding glass and patio doors in Deerfield Beach typically need one of four things: roller replacement, track realignment, weather-stripping renewal, or a full door system swap when the frame has twisted. We handle all of it as an independent CGI service provider, usually in a single visit, with upfront pricing that holds. If you live in Deerfield Beach, Pompano, Lighthouse Point, or anywhere along the A1A corridor, and your CGI door drags, sticks, leaks light, or won’t lock, call (786) 743-5882 and a live person answers. This page is for homeowners who already know CGI makes a serious impact door and want the repair done right the first time.
How CGI Products Fail - and How We Fix Them
CGI builds a heavy, well-engineered door. But salt air, hard use, and time expose weak points just like any other line. Here’s what we actually see on Deerfield Beach service calls:
- Roller failure on CGI Estate and Targa series sliders. The tandem steel rollers CGI uses on older Estate doors wear unevenly, and the door starts riding on the frame instead of the track. You’ll hear a scraping sound and feel a catch mid-slide. We replace rollers with OEM-spec stainless carriers and clean the track channel properly, not just grease over grit. In Deerfield Beach, that grit is usually sand and salt.
- Strike plate and lock misalignment on the CGI 900 Series patio door. Over time the fixed panel settles, the active panel shifts, and the hook bolt stops seating. A door that won’t lock is a door that won’t hold design pressure. We reset the panels on the track, shim the frame where the rollers sit, and re-align the strike so the bolt throws clean.
- Weep hole clogging and sill rot at the threshold. Deerfield Beach gets about 60 inches of rain a year, and CGI sills have small weep channels that collect sand and debris. When they clog, water pools under the track and wicks into the frame. We clear the channels, inspect for hidden corrosion at the sill cap screws, and replace the threshold bed if the original seal has flattened.
- Weather-stripping compression set on all CGI sliding lines. The pile strips and nylon fin seals inside the interlock compress over a decade of sun exposure. The door closes, but air and water still get through the meeting stile. OEM weather-stripping for CGI is stiff at first, which is normal, and it seats correctly after about 40 open/close cycles. We install it, cycle the door, and check for light gaps with the panel closed.
- Broken or stripped handle sets. CGI handle sets are specific; a generic replacement will not throw the hook bolt correctly on the 900 Series. We source the correct handle geometry for the locking mechanism, not just the closest part on the shelf.
Our CGI Sliding Glass & Patio Doors Process
Here’s exactly what happens when you call TruePane Windows & Doors for CGI sliding glass or patio door work in Deerfield Beach:
- 1
Call and talk to a person. No voicemail tree. You describe the symptom; we ask the right questions and schedule a visit.
- 2
On-site diagnostic. A uniformed, background-checked technician inspects the rollers, track, sill, interlock, and frame. Every opening is measured twice, not once.
- 3
Parts decision on paper. We show you the OEM option and, where it makes sense, a quality aftermarket equivalent with the trade-offs written down. No mystery markup.
- 4
Repair or replacement. Most CGI sliding door work finishes in a single visit. The door is adjusted, aligned, sealed, and tested.
- 5
Warranty registration. Under The Keystone Standard, we register both warranty layers in writing before the truck leaves your driveway. Durations are stated, not implied.
- 6
Done right check. We cycle the door fully, lock and unlock it, and watch it under load. The work is covered by our Done Right Promise. If it’s not right, we make it right with no paperwork fight.
What CGI Sliding Glass & Patio Doors Costs in Deerfield Beach
Here are honest price ranges for the CGI sliding glass and patio door work we do most often in Deerfield Beach:
- Roller replacement (single slider panel): $185-$320, depending on whether the door needs tandem rollers or standard carriers.
- Track cleaning and full realignment: $145-$260, including sill cap removal and adjustment.
- Lock assembly and strike plate: $160-$290 for CGI 900 Series hardware with correct geometry; aftermarket equivalent runs about 20% less when the door condition allows it.
- Complete weather-stripping renewal (full perimeter and interlock): $280-$460.
- Full CGI patio door replacement (impact-rated, installed): $4,200-$7,800, depending on size, series, and opening condition.
What moves the price is frame condition, corrosion at the sill, and whether the glass itself is fogged or intact. Call (786) 743-5882 for a free estimate. We put the number in writing before we start, and the bill matches the quote.
Why Deerfield Beach Homeowners Call TruePane Windows & Doors for CGI Work
We’ve served this community since 2008 through the craft tradition Dale Kessler started and still runs. Dale grew up a few blocks from Quiet Waters Park in Deerfield Beach, which means he’s watched salt air eat aluminum frames off houses for his entire life. He learned the trade at Broward College’s construction technology program, worked residential and light commercial jobs up and down the A1A corridor, and built TruePane on a simple rule: if the pane is not true, the job is not done.
We’re not the cheapest bid in Deerfield Beach, and we don’t want to be. We show up when we say, measure every opening twice, and register both manufacturer warranty layers in writing before the truck leaves. The Done Right Promise is the baseline, not a selling point. And since we’re authorized installers for more than a dozen lines, including PGT, CWS, ES Windows, and ECO Window Systems, we can quote you side by side on paper if you’re weighing a repair against a replacement in a different brand. A square deal, every time.
FAQs
No, not when the work is done with OEM-spec parts and the correct procedures. As an independent CGI service provider, we follow CGI’s installation guidelines for rollers, seals, and hardware, and we register both warranty layers in writing under The Keystone Standard. If a repair requires a deviation, we tell you before we start, not after. Call (786) 743-5882 with your door’s serial number and we’ll check the specifics.
In most Deerfield Beach homes, yes. CGI’s hardware finishes for the 900 Series and Estate line are available in the factory colors; we order to match your existing finish or the closest current production option. For doors older than 15 years, finish options may have shifted, and we’ll show you the match before ordering. Call (786) 743-5882 and we’ll confirm.
Common parts like rollers, pile strips, and handle sets are usually in our local stock or arrive within three to five business days in Deerfield Beach. Custom glass packages or full replacement panels take longer, typically two to four weeks depending on the series and size. We’ll give you a written timeline at the estimate, not a guess.
Repair when the issue is hardware: rollers, track alignment, seals, or lock alignment. Replace when the glass is fogged, the frame has twisted, or the door no longer holds design pressure. In Deerfield Beach, a 20-year-old CGI door that has spent two decades facing east salt wind is usually at the end of its service life. We’ll quote both options on paper and let the numbers and your budget decide. Call (786) 743-5882 for a free assessment.
They adjust only the active panel and leave the fixed panel out of square. On a CGI sliding door, the fixed panel sets the track alignment, and if it has moved, the active panel will never roll true. We check and reset the fixed panel first. If it is not in the contract, it is not in the scope.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Deerfield Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After