Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterJeld-Wen Door Installation: The Deerfield Beach Owner’s Guide
Jeld-Wen door installation in Deerfield Beach typically runs $350-$850 for a single door swap when the slab and hardware are sound, and $900-$2,200 when the rough opening, frame, or threshold needs rebuilding. We stock Jeld-Wen-compatible door components on the truck and can complete most single-door installs in one visit. The usual discovery moment is not subtle: the door has started dragging across the tile, the deadbolt no longer lines up with the strike plate, or you can see daylight through the weatherstripping on the hinge side. In coastal air like ours, the hinge screws and the sill take the worst of it.
What follows is a straight accounting of what we see in Deerfield Beach homes with Jeld-Wen doors, what it costs to fix, and how to tell whether the door is worth saving or the rough opening needs the real attention. Written from the perspective of a crew that has done this work in this town for a long while.
Which Jeld-Wen Models This Applies To
Jeld-Wen has manufactured doors under a lot of names over the decades: Pozzi, Karona, IWP, and the builder-grade Smooth-Pro and ProCore lines you see in Florida production homes. The gotcha is that Jeld-Wen changed hardware prep specs across some of those lines, so a hinge from a Karona door is not automatically right for a Smooth-Pro slab, even if the size matches. Owners can check the label: Jeld-Wen stamps the top edge of most door slabs with a manufacturing code, and the hinge layout and bore placement follow the AWI/WDMA standard for that year.
When we quote a Jeld-Wen door installation in Deerfield Beach, we measure hinge spacing, backset, and slab thickness before ordering anything. We are an independent service provider, not affiliated with Jeld-Wen, which means we can match the easiest path: OEM Jeld-Wen components when the door is recent and under warranty, and quality aftermarket equivalents when OEM parts mean waiting three weeks for a hinge set that a local supplier already stocks. Dale Kessler would say the right part is the one that matches the door exactly, not the one with the prettiest box.
Signs Your Jeld-Wen Door Installation Is Failing
- Door drags or binds along the bottom or latch side. The slab has settled or the hinges have worn, especially the top hinge, and the door is now out of square with the frame. In Deerfield Beach humidity, even a 1/8-inch shift becomes a full bind by August.
- Deadbolt or latch no longer lines up with the strike plate. The door has dropped, usually because hinge screws have wallowed out the jamb. Tightening them is a stopgap, not a fix.
- Visible daylight through the weatherstripping on the hinge side or top. The reveal has opened up, which means your air conditioning is leaking out and the salt air is leaking in.
- Door swells and requires a shoulder to open after heavy rain. A failed sill or threshold seal is letting water wick into the slab edge. On wood Jeld-Wen doors, that is the beginning of rot.
- Hinges creak, sag, or show visible play when you lift the door by the knob. Worn hinges put the full door weight on the bottom pin and the latch, accelerating every other problem.
Replacement Cost & What’s Included
In Deerfield Beach, a straightforward Jeld-Wen door installation where we hang a properly sized slab on the existing frame runs $350-$850. That includes removing the old slab, setting and shimming the new one, a new hinge set, adjusting the reveal, and weatherstripping where needed. If the jamb is soft or the threshold has rotted out, the job becomes a frame repair or full replacement, usually $900-$2,200 depending on what the rough opening reveals once we pull the trim.
Every price we give is fixed before work starts, in writing, with no change orders and no surprise line items. The quote shows parts and labor separately, so you can see exactly what the components cost. Both the manufacturer warranty and our workmanship warranty are registered in writing before we leave the driveway, covered under The Keystone Standard and the Done Right Promise. A square deal, stated plainly.
DIY or Call Us?
What owners can safely do is diagnose: check whether the door is dragging because of hinge wear versus frame settlement, measure the existing slab thickness and hinge spacing, and confirm the backset. That is useful information to have when you call us. What goes wrong for a homeowner doing the install is usually about the rough opening: most Jeld-Wen frames in Deerfield Beach have shifted over decades of humidity cycles, and simply swapping a slab onto an out-of-square jamb means the new door will bind before the month is out.
If the top hinge screws spin without tightening, the jamb is compromised. That is not a five-minute fix, and it only gets worse with the wrong shim job. If you were told by a previous contractor that a new door was hung and it has bound since the day they left, you already know what a rushed install looks like. Call us at (786) 743-5882 and we will measure the opening, tell you what the frame actually needs, and quote it in writing.
FAQs
In our coastal climate, a well-installed Jeld-Wen slab on a sound frame lasts 20 to 30 years; the hinge hardware and weatherstripping typically need attention every 7 to 10 years. The salt air and July humidity accelerate hinge wear and finish degradation compared to inland Florida. Call (786) 743-5882 and we’ll assess what’s worn versus what’s done.
If the slab itself is intact and the failure is in the hinges, strike alignment, or weatherstripping, repair is a one-day job and far less expensive than replacement. If the jamb is soft or the slab edge has water damage, replacement is the honest recommendation. We will tell you which applies, in writing, before any work starts.
Most single-door installations that do not require frame rebuilding are completed in one visit, usually four to six hours including removal, setting, hardware, and cleanup. If the rough opening needs work, the job typically runs two days. Call (786) 743-5882 for an exact timeline based on your opening.
We carry Jeld-Wen-compatible hinge sets, thresholds, weatherstripping, and standard slab sizes on the truck, and we can source OEM Jeld-Wen components through local suppliers for warranty-critical jobs. This means most repairs and installs do not need a second appointment. Call (786) 743-5882 and we’ll confirm the part before we arrive.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Deerfield Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.