Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Mr-Glass Impact Windows in Deerfield Beach: What to Know First
Mr-Glass impact window repair and replacement in Deerfield Beach typically runs $340 to $1,900 depending on whether we are replacing a failed seal, swapping out hardware, or setting a new sash in an existing frame. Most Mr-Glass jobs in our shop take one visit, with lead times running two to four weeks for custom glass once we confirm the spec. We are an independent Mr-Glass service provider, not a factory warranty station, so we quote the work honestly and register every warranty layer in writing before the truck leaves your driveway.
This page is for Deerfield Beach homeowners who own Mr-Glass impact windows and need straight answers: what fails, what it costs, and who can fix it without voiding the paperwork. Call (786) 743-5882 and a live person answers, day or night.
How Mr-Glass Products Fail - and How We Fix Them
Mr-Glass impact windows hold up better than most aluminum frames along the A1A corridor, but we see the same handful of failures repeat across Deerfield Beach neighborhoods. Here is what actually goes wrong, series by series, and how we address each one.
- Vinyl bead glazing failure on builder-grade Mr-Glass horizontal sliders. The vinyl bead holding the impact laminate in place shrinks in the salt air, and once it loses its grip, the glass rattles in the frame and the seal starts breathing moisture. We pull the sash, reset the laminate with fresh bead, and tool it tight. If the glass has fogged, we quote a new insulated unit instead of pretending a sealant smear will hold.
- Corroded roller assemblies on Mr-Glass sliding glass doors. Deerfield Beach humidity works its way into the roller housing, the stainless bearings rust, and the door starts binding in July. We see it in The Cove and along Hillsboro Boulevard regularly. We replace the rollers with stainless steel assemblies, not the zinc-plated ones the factory shipped, and adjust the track so the door carries true instead of grinding.
- Crank operator stripping on Mr-Glass casement impact windows. The operator gear is cast zinc, and after a decade of cranking against salt-stiffened hinges, the teeth shear. This is the most common Mr-Glass casement failure we repair. We replace the operator, grease the hinges correctly, and set the arm so the sash seats square into the weatherstripping.
- Interlayer hazing on early-run Mr-Glass impact laminate. Some of the earlier Mr-Glass impact units used an interlayer that starts clouding at the edges after eight to ten years of direct Florida sun. The window still passes a structural test, but the view turns milky. We explain the difference between cosmetic hazing and true seal failure before we quote, because replacing a window for a cosmetic issue is a waste of your money if the hurricane rating is intact.
- Failed adhesive glazing tape on fixed Mr-Glass picture windows. We find fixed impact units where the factory-applied glazing tape has dried and separated, leaving the unit loose in the frame. You will notice it during a storm when the glass flexes more than it should. We deglaze, clean the rebate, and reset with a two-sided structural tape rated for impact windows, not the hardware-store variety.
Our Mr-Glass Impact Windows Process
We follow a process that keeps the job honest from the first measurement to the final cleanup. Here is what you can expect when we work on a Mr-Glass window or door in Deerfield Beach.
- 1
Call and schedule. A live person answers 24 hours a day. We ask what we are walking into, and we show up when we say we will, in uniform and background-checked.
- 2
Measure and diagnose. We measure every opening twice, once with a folding rule and once with a laser. Dale Kessler grew up near Quiet Waters Park watching salt air eat aluminum frames, so we read the rough opening honestly and tell you what the frame actually needs rather than what keeps the estimate low.
- 3
Parts decision. We quote OEM Mr-Glass parts where they make a real difference and quality aftermarket components where they outperform the original. You see it on paper, side by side, before we order anything.
- 4
Repair or replacement. Clean work, drop cloths down, sash handled with care. We set the glass true, torque hardware to spec, and clear the debris when we leave.
- 5
Test and document. We operate the sash, check the drainage, and confirm the seal. Every warranty layer gets registered in writing before we back out of the driveway.
- 6
The Done Right Promise. If something is not right, we return and make it right. No paperwork fights. If the pane is not true, the job is not done.
What Mr-Glass Impact Windows Costs in Deerfield Beach
Here are realistic numbers for Mr-Glass impact window work in Deerfield Beach, based on what we quote regularly.
| Mr-Glass Repair Scenario | Typical Price Range |
|---|---|
| Hardware replacement (crank operator, roller, lock) | $340 - $620 |
| Vinyl bead reglazing, single sash | $450 - $780 |
| Insulated glass unit replacement (impact, single sash) | $600 - $1,100 |
| Full window replacement in existing frame | $900 - $1,900 |
| Sliding door roller and track correction | $380 - $700 |
Cost moves with glass size, whether the unit is laminate or double-pane impact, and access. A second-floor window in a Deerfield Beach condo with HOA restrictions costs more than a ground-floor slider. We keep pricing upfront and itemized, and we stand behind the numbers without change orders. Call (786) 743-5882 for a free estimate written down, not guessed.
Why Deerfield Beach Homeowners Call TruePane Windows & Doors for Mr-Glass Work
TruePane Windows & Doors was founded in 2008 by Dale Kessler, a second-generation glazier who put in years working residential and light commercial jobs along the A1A corridor before starting this company. We have served Deerfield Beach and nearby communities since 2008 through a heritage of craft, and we act like a company that plans to be in town for another thirty.
We are authorized installers for more than a dozen manufacturer lines, including PGT, CGI, CWS, ES Windows. That matters when your Mr-Glass window is beyond saving and you want to compare a full replacement side by side on paper. We register both warranty layers in writing before we leave the driveway, and our technicians work in your home the way they would work in their own mother’s. A square deal, a true line, and a phone that gets answered.
FAQs
No. We are an independent Mr-Glass service provider, not a factory autho factory-authorized warranty station. That means we can quote honestly without being forced into factory parts or inflated labor. If your Mr-Glass warranty is still active, we will help you understand what it actually covers and whether a repair or replacement makes more financial sense. Call (786) 743-5882 for a straight assessment.
Most hardware and reglazing repairs take one visit and are completed the same day. Custom glass replacement usually takes two to four weeks from order confirmation, depending on the laminate spec. We do not promise same-day service on custom work, because nobody orders impact laminate overnight. Call (786) 743-5882 and we will give you a realistic timeline, not a rushed one.
Sometimes, and we will tell you upfront before we quote. Mr-Glass frames from ten or fifteen years ago may not accept current impact laminated glass without modification. We measure everything twice, read the frame honestly, and present your options on paper, including PGT, CGI, CWS, and ES Windows lines if a full replacement is the better route. Call (786) 743-5882 for a free estimate.
Yes, every job is covered by our Done Right Promise backed by The Keystone Standard. Both warranty layers, manufacturer and workmanship, are registered in writing before we leave the driveway. If it is not done right, we make it right. No paperwork fights, no arguing. Call (786) 743-5882 to schedule.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Deerfield Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.



Before
After
Before
After
Before
After