PGT Window Replacement Nationwide | TruePane Windows & Doors

PGT Window Replacement: The Deerfield Beach Owner’s Guide

We stock, order, and install PGT window replacements throughout Deerfield Beach, with most single-sash or glass-unit replacements running between $420 and $1,650 installed depending on the series and glass package. If the part is on our truck or in our local supply chain, the job is usually done in one visit. What we see most often in this part of Broward County is salt-air corrosion on aluminum frames, failed insulating glass seals from years of direct coastal sun, and worn balance systems on single-hung and double-hung units that make the sash impossible to lift safely.

Call (786) 743-5882

We are an independent installer and service provider, not affiliated with PGT. That matters because we can tell you straight whether a repair is worth doing on an older series, or whether the frame has moved past the point where a new sash will seat and seal the way it should.

Which PGT Models This Applies To

PGT builds several distinct window platforms, and the replacement part you need depends on which one you have. The older WinGuard line, common in Deerfield Beach homes built through the late 2000s, uses a heavy aluminum frame with a mechanically fastened glass stop. The newer WinGuard Vinyl and Spectrum series moved to welded vinyl corners and different balance hardware, so a sash from one line will not swap into the other. In coastal sections of Deerfield Beach, we regularly see WinGuard fixed-lite picture windows and casements, while the inland neighborhoods near Quiet Waters Park tend toward Spectrum single-hung and sliding windows.

To identify what you have, look for the PGT certification label etched into the glass corner or printed on the spacer bar between the panes. It lists the series, the glass make-up, and the manufacturing date. A photo of that label and two measurements, width and height of the visible glass, gets us most of the way to a correct match before we even walk the job. OEM PGT replacement sashes and insulated glass units carry the full manufacturer warranty, but in some older series the lead time is long. There are quality aftermarket glass packages that meet the same Miami-Dade or Florida Building Code ratings, and we quote both side by side on paper so you decide with real numbers in front of you.

Signs Your PGT Window Replacement Is Failing

• Fog or condensation between the glass panes. The edge seal on the insulating glass unit has failed. In Deerfield Beach, this happens faster than the manufacturer’s average because the daily heat and humidity cycle flexes the seal continuously. Once moisture shows inside, the glass package cannot be cleaned, only replaced.
• The sash binds, tilts, or drops when you let go. Balance shoes, pivot pins, or spiral balances in the side jambs have worn out or snapped. PGT balance hardware is series-specific, and forcing a heavy bound sash eventually bends the frame or shatters the glass.
• You can hear wind or feel air moving around the closed sash. Weatherstripping has compressed or the frame has settled out of square. In coastal Deerfield Beach, salt residue often hardens on the sills and accelerates weatherstrip wear, so a visual check catches this early.
• Visible oxidation or pitting on the frame or sash corners. Salt air corrosion on aluminum PGT frames is a known reality a few blocks from the beach. Pitting at the corners signals the frame material is losing structural integrity, and a replacement part bolted to a corroded frame will not seat or seal correctly.
• Cracks in the glass radiating from one corner or edge. Impact-glass laminated panes can crack from pressure shifts, debris, or a frame that is racked. Cracked glass in a PGT impact window continues to hold together because of the laminate layer, but it no longer provides full design pressure protection and should be replaced rather than taped over.

Replacement Cost & What’s Included

For Deerfield Beach, a simple PGT insulated glass unit replacement in a fixed or single-hung window typically runs $420-$780 installed. A full sash replacement with new frame hardware and weatherstripping lands between $780 and $1,650, depending on the series, the glass package, and whether it carries a Miami-Dade NOA for impact zones. Casements and large picture windows run higher due to glass area and handling.

Every quote is written and line-itemed: part, labor, any needed balance or weatherstrip hardware, and disposal of the old unit. You see the manufacturer line, the glass make-up, and the warranty duration before you sign. Both warranty layers get registered in writing before our crew leaves your driveway. If anything is off, we come back under the Done Right Promise. No paperwork fight, no fine print.

DIY or Call Us?

What you can safely do is take photos of the PGT label, measure the visible glass width and height, and clear furniture away from the window before we arrive. That saves a trip and gets your quote faster. What we do not recommend is pulling a sash out of a PGT frame on your own. These are heavy impact-rated units. A WinGuard sash can weigh thirty pounds or more, and when a balance releases under tension, the sash drops hard. We have seen broken toes, cracked tile, and one sliding glass door exploded by a misjudged lift.

If the window is binding or the sash is out of its track, let a trained glazier handle the removal. Call (786) 743-5882 and we will walk you through what you are looking at, then give you a straight quote. The visit and the estimate are free.

FAQs