Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterTherma-Tru Custom & Geometric Windows in Deerfield Beach: What to Know First
We install, service, and replace Therma-Tru custom and geometric windows throughout Deerfield Beach as an independent Therma-Tru service provider, not a factory-authorized dealer. Most custom and geometric window jobs take us one to two visits: the first to measure the rough opening and quote it straight, the second to set the unit, flash it, and walk you through the warranty paperwork. Pricing for a single custom Therma-Tru geometric window in Deerfield Beach, installed, typically runs $900 to $2,400 depending on glass package, frame material, and how much structural work the opening needs. Call (786) 743-5882 and a live person will answer.
This page is written for homeowners who already own Therma-Tru windows or doors and are dealing with a custom or geometric replacement, a retrofit, or a failure in an arched or oversized opening. If you have a circle-top, eyebrow, trapezoid, or oversized picture unit that is fogged, binding, or leaking at the corners, you are in the right place.
How Therma-Tru Products Fail - and How We Fix Them
Therma-Tru makes a solid entry door, but their window line has specific failure patterns we see repeatedly in Deerfield Beach. Salt air and humidity accelerate every one of them.
- Fogged custom glass units in the Signature Series. Therma-Tru’s Signature window line used dual-pane insulated glass with a spacer system that does not hold up well to ten or fifteen years of Deerfield Beach salt exposure. The seal at the bottom corner of the sash fails first, moisture gets in, and you get that permanent haze between the panes. We replace the glass unit, not the whole window, and we install an aftermarket spacer rated for coastal humidity, which is a stronger material than what the factory shipped.
- Arched and eyebrow windows losing their shape at the frame corners. Any curved or arched window puts constant stress on the corner joints of the frame. In older Therma-Tru units with wood-clad corners, humidity causes the wood to swell and the joint to separate just enough to break the finish and let water behind the flashing. We square the opening back up, reinforce the corner with a steel biscuit where the design allows, and reset the unit with new flashing that moves water away from the seam.
- Trapezoid and parallelogram windows with roller and latch wear in the venting sections. The Therma-Tru Encore series venting geometric windows use a hardware set that was sourced from a supplier who no longer makes that exact latch profile. Deerfield Beach homeowners call us when the latch stops catching. We match the hardware function to a current OEM-compatible part and adjust the sash so it closes without forcing, which is what wears the latch out in the first place.
- Oversized picture windows with visible seal distortion from UV load. In the larger custom Therma-Tru picture units, especially south-facing and east-facing openings in Deerfield Beach, the glass seal faces direct sun for most of the year. The seal does not necessarily fail into fog, but it starts to look wavy at the edges. That distortion is the first sign the glass unit is on its way out. We flag it during tune-ups, because replacing an oversized insulated glass unit is a scheduled job, not an emergency, and you do not want it to become one.
- Geometric windows installed by another company with no perimeter drainage, causing sill rot and frame staining below the glass. This is less a Therma-Tru defect and more an installation shortcut we undo regularly. A geometric window in a Deerfield Beach stucco wall needs a clear drainage path at the bottom flange, or the water that beads along the glass in the morning has nowhere to go but into the wall. We remove the unit, install proper sill pan flashing, and reset the window. If the frame is still sound, the window is saved. If not, we tell you before we order anything.
Our Therma-Tru Custom & Geometric Windows Process
Here is how a typical Therma-Tru custom or geometric window job runs with us, from your first call to the final walkthrough.
- 1
Call and talk to a person. You call (786) 743-5882. You get a scheduler, not a recording. We ask about the window, the symptoms, and the approximate size of the opening.
- 2
On-site measurement and diagnosis. A technician arrives, measures the opening twice with a tape measure and a folding rule, checks the condition of the frame, the flashing, and the surrounding wall. Dale Kessler grew up a few blocks from Quiet Waters Park, so he knows exactly what Deerfield Beach salt air does to window openings over twenty years.
- 3
Written line-item quote. We write the quote on paper, in front of you, with the manufacturer line and glass package stated. No change orders later. If it is not in the contract, it is not in the scope.
- 4
Parts decision: OEM or aftermarket. For glass units and moving hardware, we recommend the best part for the job and tell you why. Some Therma-Tru hardware is worth matching exactly. Some aftermarket glass spacers and seal materials outperform the original in coastal humidity. You see the tradeoff in writing before we order.
- 5
Installation and testing. We set the unit, flash it correctly, and run the sash through its full range. The standard is a window that opens, closes, and seals without forcing, and a frame that is square in the opening.
- 6
Warranty registration and the Done Right Promise. Before we leave, both manufacturer warranty layers are registered in writing with durations stated. If anything is not done right, we make it right within 90 days. No paperwork fight.
What Therma-Tru Custom & Geometric Windows Costs in Deerfield Beach
Custom and geometric window pricing depends on shape complexity, glass package, frame material, and whether the rough opening needs structural correction before the unit is set. Here are the ranges we quote most often in Deerfield Beach.
- Glass unit replacement in an existing Therma-Tru geometric sash: $350 to $800 per unit, depending on size and whether it is tempered or laminated.
- Complete Therma-Tru custom window replacement, standard geometric shapes (trapezoid, octagon, eyebrow): $900 to $1,600 installed per unit.
- Oversized picture or arched Therma-Tru window replacement: $1,400 to $2,400 installed, more if the opening needs structural reframing or the wall sheathing is compromised.
- Multiple-unit custom window job (3+ geometric windows): $2,800 to $6,500 total, with most of the cost variance coming from glass package and opening condition.
What moves the price: impact-rated versus non-impact glass, laminated versus tempered, frame material, and whether we are working with the existing opening or correcting someone else’s bad install. Call (786) 743-5882 and we will put numbers on paper. Estimates are free.
Why Deerfield Beach Homeowners Call TruePane Windows & Doors for Therma-Tru Work
We have been serving Deerfield Beach and the surrounding communities since 2008 through a heritage of craft. TruePane Windows & Doors was founded in 2008 by Dale Kessler to fix the install and warranty problems he saw over and over as a working glazier. We are an independent Therma-Tru service provider, which means we answer to you, not to a factory quota.
Every Therma-Tru job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves the driveway. Our technicians are background-checked and uniformed. We are also an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, CWS, and ES Windows, so if a Therma-Tru unit is not worth saving, we give you side-by-side quotes on paper and you decide. A live person answers the phone 24 hours a day, 7 days a week.
FAQs
In most cases you can replace just the insulated glass unit, which runs $350 to $800 in Deerfield Beach depending on size and glass type. If the frame is square and the sash hardware is sound, replacing glass is the right call and it saves the rest of the window. Call (786) 743-5882 and we will tell you which way your opening goes after we measure it.
No, not when the work is done correctly and documented. As an independent Therma-Tru service provider, we are not authorized by Therma-Tru, but we keep warranty documentation clear and register the manufacturer layers in writing. If the window still has active factory coverage, we tell you before we do anything that could affect it.
Most custom and geometric window replacements are completed in one visit once the unit is in hand, though the lead time on the glass order runs two to four weeks depending on the shape and glass package. Call (786) 743-5882 for a current timeline on your specific window.
Yes, and it is one of the most common calls we get in Deerfield Beach. We remove the unit, repair or reinforce the opening as needed, and reset the window with proper flashing and drainage. The work is covered by the Done Right Promise.
Written by Dale Kessler, Owner, TruePane Windows & Doors at TruePane Windows & Doors, serving Deerfield Beach and nearby areas.
Six Reasons Homeowners Choose TruePane Windows & Doors
Impact systems engineered to design pressures up to +/-100, matched to your wind zone - your openings hold when the storm arrives.
Low-E insulated impact glass from our manufacturer lines commonly cuts monthly cooling bills 20-30%.
Laminated impact glass shuts out up to 40% of outside noise - traffic, neighbors, weather.
Monitoring services run $30-90 a month. Laminated impact glass resists forced entry around the clock, with no subscription.
Florida homeowners average around 25% savings on the windstorm portion of their policy after protecting every opening - some homes qualify for more.
A full impact package upgrades curb appeal, buyer confidence and appraised value in one project.